# Construction Cost Calculator

> Free construction cost calculator. Estimate the cost to build a house, addition or commercial build-out by state, size and finish level.

Page: https://markupestimating.com/construction-cost-calculator

Free tool

Estimate the cost to build a house, addition or commercial build-out. Get a ballpark range in seconds, then upload your plans for an exact number.

ESTIMATED CONSTRUCTION COST

$329,000 – $535,000

$137–223 / SQ FT New house · 2,400 sq ft · Standard · US average

Site work 8% $26K–$42K

Foundation / concrete 10% $34K–$56K

Framing 17% $55K–$89K

Roofing & exterior 13% $44K–$72K

MEP 19% $63K–$103K

Interiors / finishes 24% $80K–$129K

Soft costs 8% $27K–$44K

Ballpark range based on regional averages. Not a quote.

[Get an exact estimate: upload your plans](https://markupestimating.com/quote)

We multiply your square footage by a published cost per sq ft for the project type. New houses are adjusted for finish level using the spread of 2025 Census contract prices, and houses and additions are adjusted for your Census region. The range runs from 20% below to 30% above that figure, the accuracy band AACE International gives for square-foot building estimates. The category breakdown uses NAHB’s 2024 construction cost shares.

SOURCES: US Census Bureau, Characteristics of New Housing 2025 (contract price per sq ft, excl. lot) · NAHB, Cost of Constructing a Home 2024 · Remodeling 2025 Cost vs. Value Report (Zonda) · Cushman & Wakefield, Office Fit-Out Cost Guide Americas 2026 · AACE International RP 56R-08 (Class 5 estimate range)

## How much does it cost to build a house?

### The typical range

Most new homes in the US cost between $90 and $300 per square foot to build, before land. A 2,000 sq ft house with standard finishes typically lands between $275,000 and $446,000.

### What the number includes

Construction cost covers labor, materials, equipment and contractor overhead and profit. It usually excludes land, financing, furniture and landscaping beyond basic grading. Design and permit fees are shown separately as soft costs.

### Why a range, not a price

Two houses with the same footprint can cost very different amounts depending on design, site and finish choices. A range reflects that spread until someone measures the actual plans.

## What drives construction cost

Location Labor rates, material delivery and permit fees vary by state and metro area.

Size Larger buildings cost more in total but often less per square foot, since fixed costs spread out.

Finish level Cabinets, flooring, fixtures and windows can move the total more than structural choices.

Site conditions Slopes, rock, poor soil or long utility runs add excavation and foundation work.

Design complexity Extra corners, complex rooflines, vaulted ceilings and large openings add framing labor and material.

Labor market Local demand for trades affects availability, schedules and bid prices.

## Ballpark vs. real estimate

THIS CALCULATOR Ballpark range

BASED ON Square footage and regional averages

DETAIL A total range and seven broad categories

TURNAROUND Instant

USE IT FOR Early budgeting and feasibility checks

COST Free

MARKUP ESTIMATING Takeoff-based estimate

BASED ON Quantities measured from your plan set

DETAIL Line items by trade, with material and labor

TURNAROUND Usually 24 to 72 hours

USE IT FOR Bidding, financing and comparing contractors

COST Quoted up front, before work begins

- [Cost Estimating](https://markupestimating.com/services/cost-estimating)
- [Preliminary Estimate](https://markupestimating.com/services/preliminary-estimate)

## Calculator FAQs

**How accurate is this construction cost calculator?**

It gives a ballpark range based on regional averages, which is useful for early budgeting and feasibility. For a number you can bid or finance from, [upload your plans](https://markupestimating.com/quote) for a takeoff-based estimate.

**Does the cost include land?**

No. The range covers construction only: labor, materials, equipment and contractor overhead. Land and financing are not included. Design and permit fees appear under soft costs.

**Is it cheaper per square foot to build a bigger house?**

Usually. Fixed costs such as site work, utility connections and kitchens spread across more square feet, so cost per square foot tends to drop as size goes up.

**How is this different from a preliminary estimate?**

A [preliminary estimate](https://markupestimating.com/services/preliminary-estimate) is prepared by an estimator from your drawings, even early ones. This calculator only uses the size and options you enter.

**How do I get an exact estimate?**

[Send us your plans](https://markupestimating.com/quote). We measure quantities from the drawings and price them by trade. See [cost estimating](https://markupestimating.com/services/cost-estimating) for what is included.

## Get a Free Quote

Upload your plans and tell us the scope. We'll confirm turnaround time and price before any work begins.

[Upload your plans Send us your plan set and scope, in any format, for a project of any size.](https://markupestimating.com/quote)
